C&H Technologies M 2 2 0 Manuel d'utilisateur télécharger pdf (Page 12)

2.4 PREPARATION FOR RESHIPMENT

If the module is to be shipped separately it should be enclosed in a suitable water and vapor proof

anti-static bag. Heat seal or tape the bag to insure a moisture-proof closure. When sealing the

bag, keep trapped air volume to a minimum. The shipping container should be a rigid box of

sufficient size and strength to protect the equipment from damage. If the module was received

separately from a C&H system, then the original module shipping container and packing material

may be re-used if it is still in good condition.

C&H Technologies, Inc. <> 445 Round Rock West Drive <> Round Rock, Texas 78681 <> www.chtech.com

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Pas de commentaire

C&H Technologies M 2 2 0 Manuel d'utilisateur Page 12